Login | Register
产品中心
Home > Products > Sweeper truck > Dongfeng Tuyi CL5041TXSBEV sweeper truck

Dongfeng Tuyi CL5041TXSBEV sweeper truck

    Dongfeng Tuyi CL5041TXSBEV sweeper truck

    The Dongfeng Tuyi CL5041TXSBEV Sweeper Truck is a fully electric, zero-emission vehicle designed for urban and industrial cleaning. Equipped with high-capacity batteries, advanced suction and brush systems, and water spraying capabilities, it ensures efficient debris collection, dust suppression, and road washing while reducing environmental impact and operational noise.
  • Share:
  • Contact us Inquiry

Product Model: CL5041TXSBEV
Brand: Chengli

Vehicle Specifications:

  • Gross Vehicle Weight (Kg): 4495

  • Superstructure Volume (m³): 3.8 (1.8 m³ clean water tank + 2 m³ dust container)

  • Electric Motor Rated Power (Superstructure): 15 kW

  • Overall Dimensions (mm): 5570 × 1650 × 2180

  • Curb Weight (Kg): 3580

  • Recommended Charging Time (at suggested power): ~0.5–1 hour

  • Number of Axles: 2

  • Wheelbase (mm): 3000

  • Chassis Model: EQ1040TACEV4

  • Chassis Motor Maximum Power: 70 kW

  • Number of Tires: 6

  • Tire Specifications: 185R15LT 8PR

  • Fuel Type: Pure electric

  • Recommended Charging Station Power: 120 kW

  • Battery Brand: CATL

  • Battery Type: Lithium Iron Phosphate (LiFePO₄)

  • Battery Capacity: 66 kWh

  • Battery Pack Rated Voltage: 386.4 V

Key Features:

  1. The clean water tank fully utilizes onboard space with a large capacity of 1.8 m³. The waste/dust container uses a single-layer carbon steel structure with a tipping unloading design.

  2. Each vehicle is tested by dedicated personnel in simulated complex operating environments to ensure reliability before delivery.

  3. The pure electric motor ensures low operational noise during all cleaning tasks.

Safety and Operating Notes:

  1. Keep unauthorized personnel away from the vehicle while it is operating.

  2. During operation, avoid running over large objects such as bricks or heavy debris.

  3. When emptying the wastewater tank, first open the rear door drain valve. Only open the rear door to dump waste after the drain valve has fully discharged.

  4. Waste discharge must be performed in designated disposal areas. No personnel should stand within 5 meters of the rear door of the waste tank while dumping. Do not enter the vehicle or operate it normally until the waste container has fully lowered and locked into place.


The Dongfeng Tuyi CL5041TXSBEV sweeper truck marks a significant advancement in modern street cleaning equipment. As governments and cities worldwide pursue cleaner air, reduced emissions, and sustainable urban infrastructure, electric sweeping vehicles are now essential components of public sanitation fleets. This guide provides a detailed, SEO‑optimized explanation of the Dongfeng Tuyi CL5041TXSBEV — its design, capabilities, technology, advantages, specifications, applications, safety considerations, and operational best practices.

Pure electric sweeping trucks like the CL5041TXSBEV combine environmental friendliness with operational efficiency, addressing the dual goals of urban cleanliness and sustainability. By eliminating diesel consumption and lowering noise pollution, electric sweepers help city authorities improve public health outcomes and reach climate targets.

This comprehensive article is designed for sanitation professionals, fleet managers, public works planners, content creators, and anyone seeking deeply informative, well‑structured content about electric street sweepers optimized for web visibility.


What Is a Sweeper Truck?

A sweeper truck is a specialized roadway and pavement cleaning vehicle engineered to remove debris, dust, dirt, and waste from streets, parking lots, industrial areas, and other paved surfaces. Traditionally powered by diesel engines, modern sweepers increasingly use electric or hybrid power systems to enhance sustainability.

The essential function of a sweeper truck is to improve surface cleanliness, reduce airborne dust, and support public health and environmental quality. Sweepers are distinguished by integrated systems including brush mechanisms, vacuum suction, storage tanks, and optional water spraying to suppress dust.


The Rise of Electric Sweeper Trucks

In recent years, electric sweeper trucks have grown rapidly in popularity due to stricter emission regulations, rising fuel costs, and greater emphasis on sustainability. Electric sweepers use rechargeable battery systems and high‑efficiency electric motors to operate without combustion emissions, offering lower operating costs and quieter performance.

Electric models are especially valuable in noise‑sensitive areas, such as residential neighborhoods, business districts, and hospitals, where quiet and emission‑free operation is a priority. By eliminating diesel exhaust, pure electric sweeping trucks improve urban air quality and support sustainability goals.


Overview: Dongfeng Tuyi CL5041TXSBEV Sweeper Truck

The Dongfeng Tuyi CL5041TXSBEV combines electric propulsion with proven sweeping technology. It is designed for efficient cleaning of city streets, industrial compounds, parking areas, campuses, and public facilities.

Key performance priorities of the CL5041TXSBEV include:

  • Zero Emission Operation: All‑electric power eliminates diesel exhaust.

  • Efficient Sweeping and Vacuum Suction: Side brushes and central sweeping heads remove debris efficiently.

  • Dust Suppression System: Integrated spraying reduces airborne dust during cleaning.

  • Compact and Maneuverable Design: Ideal for tight urban spaces.

  • High‑Capacity Water and Waste Tank: Designed for extended work cycles.

This truck belongs to a new generation of electric sanitation vehicles that deliver environmentally conscious performance, operational efficiency, and low lifecycle cost.


How Electric Sweeper Trucks Work

Electric sweeper trucks combine several subsystems:

Electric Propulsion
Modern electric sweepers use battery systems to power both the wheels and auxiliary equipment. Large onboard batteries supply energy to the traction motor and cleaning systems. Electric drives provide smooth acceleration and regenerative braking, increasing overall efficiency.

Brush and Vacuum System
Rotating brushes (side and central) loosen dirt and guide debris toward a suction nozzle. A vacuum system then draws debris into a storage hopper using airflow generated by a blower or fan.

Water Spray System
High‑pressure water tanks and spray nozzles wet the surface ahead of the vacuum system to suppress dust and improve cleaning performance. Adjustable water jets allow for controlled dust management without oversaturation.

Debris Storage and Disposal
Swept material is stored in a dedicated hopper. When the hopper reaches capacity, a tipping or unloading mechanism allows for safe disposal at approved waste facilities.

Intelligent Controls
Smart control systems enable operators to adjust broom speed, suction power, and spray volume. Many modern vehicles include CAN bus or PLC controllers for optimized operation and diagnostic support.

This integrated process ensures thorough cleaning, minimized dust emission, and greater operational safety.


Core Components and Features

ComponentDescription
Vehicle ModelCL5041TXSBEV Electric Sweeper Truck
Drive SystemPure electric propulsion
Electric Motor Power70 kW (chassis motor)
Upper Motor Power15 kW (sweeper‑specific equipment)
Battery TypeLiFePO₄ lithium iron phosphate
Battery Capacity66 kWh
Rated Battery Voltage386.4 V
Charging Time~0.5–1 hour (120 kW charger recommended)
Gross Vehicle Weight4495 kg
Curb Weight3580 kg
Overall Dimensions5570 × 1650 × 2180 mm
Wheelbase3000 mm
Tire Configuration6 tires, 185R15LT 8PR
Water Tank Volume1.8 m³
Debris Hopper Volume2.0 m³
Total Superstructure Volume3.8 m³

Detailed Technical Specifications

The following table expands on key dimensions and capabilities:

SpecificationValue
Sweeping WidthAdjustable, dependent on brush configuration
Operational Speed0–20 km/h (typical cleaning range)
Maximum Broom Diameter800–900 mm (model dependent)
Water Pump Pressure8–12 MPa (spray system)
Water Pump Flow100–150 L/min (typical)
Vacuum Blower CapacityHigh airflow for dust capture
Brush DriveHydraulic or electric
ControllerCAN/PLC integrated management
Charging Standard120 kW DC fast charging recommended

Electric sweepers operate efficiently in both dry and wet conditions, providing dust suppression and debris capture without harmful emissions.


Advantages of the CL5041TXSBEV Electric Sweeper

Zero Emissions

With no combustion engine, electric sweepers produce no tailpipe emissions, helping reduce urban pollution and meet environmental targets.

Quiet Operation

Electric motors operate at low sound levels, making these vehicles ideal for use in parks, residential districts, and early morning or late‑night street cleaning.

Enhanced Dust Suppression

Integrated water spray systems and vacuum suction work together to capture airborne particles, improving air quality in the cleaning zone.

Lower Operating Costs

Reduced fuel consumption and fewer mechanical parts lower overall maintenance expenditures and extend service life.

High Maneuverability

Compact chassis and electric torque characteristics allow easy navigation through narrow streets and congested zones.

Intelligent Control

Advanced electrical control units provide precise adjustments for sweep speed, suction intensity, and spray pressure, optimizing cleaning performance.


Typical Applications

Electric street sweepers like the CL5041TXSBEV are widely used in:

  • Urban road maintenance and street cleaning

  • School campuses and pedestrian zones

  • Stadiums and event grounds

  • Industrial yard cleaning

  • Parking lot and facility maintenance

  • Residential community sanitation

  • Dust control at construction sites

Their zero‑emission nature makes them especially suitable for densely populated areas and regions with strict air quality regulations.


Operating Procedures

To operate the CL5041TXSBEV effectively:

  1. Pre‑Operation Checks: Verify battery charge, inspect brushes, confirm water levels, and ensure no obstructions.

  2. Activate Systems: Use the control panel to power up sweeping, suction, and water spraying.

  3. Adjust Parameters: Set brush speed and vacuum intensity based on debris type and surface conditions.

  4. Monitor Performance: Observe water levels, battery status, and debris tank capacity during operation.

  5. Efficient Navigation: Maintain steady, moderate driving speeds during cleaning to maximize effectiveness.

  6. Safe Shutdown: After use, power down systems and perform routine cleanup of components.

Following standard operating procedures ensures consistent cleaning and prolonged equipment life.


Safety Considerations

Safety remains a priority when using heavy sanitation equipment:

Operator Awareness

Operators should maintain clear sightlines, use mirrors and cameras, and avoid excessive speeds.

Environment Awareness

Avoid sweeping over large objects such as bricks or sharp debris that may damage equipment.

Waste Disposal Protocol

Only discharge waste at designated sites. Maintain safe distances when unloading debris, keeping individuals at least 5 meters away from the vehicle’s rear.

Emergency Stops

Ensure emergency stop switches and alarms are functional before starting work.

Worksite Precautions

Avoid allowing unrelated personnel near the vehicle while in operation.

Following these safety guidelines reduces risk and promotes secure work environments.


Maintenance Best Practices

Battery Maintenance

  • Charge according to manufacturer recommendations.

  • Avoid full depletion of battery charge cycles.

  • Inspect battery pack for wear and damage.

Brush & Suction System

  • Clean debris brushes after each use.

  • Replace worn bristles promptly.

  • Inspect vacuum hoses and suction nozzles for blockages.

Water System

  • Flush water tanks regularly.

  • Monitor water pump performance.

Electrical System

  • Inspect wiring harnesses and connectors.

  • Update control software when available.

Regular maintenance increases uptime and extends equipment longevity.


Frequently Asked Questions

Q: How long does it take to charge the sweeper truck?
A: With a recommended 120 kW charging station, the CL5041TXSBEV can recharge in 0.5–1 hour, optimizing operational readiness.

Q: Is the sweeping depth adjustable?
A: Yes — brush rotation speed and vacuum suction can be adjusted depending on surface conditions and debris type.

Q: Can the sweeper handle both dry and wet debris?
A: Yes — with integrated vacuum suction and water spray, it can handle mixed debris effectively.

Q: Is this truck suitable for narrow streets?
A: Absolutely. Its compact profile and electric drive allow precise maneuvering in urban environments.

Q: Does the electric sweeper require special licensing?
A: Licensing depends on local regulations; consult local authorities for specific requirements.


Conclusion

The Dongfeng Tuyi CL5041TXSBEV Sweeper Truck is a leading example of sustainable sanitation equipment for modern urban and industrial applications. Its electric design, advanced sweeping technology, and intelligent control systems deliver powerful cleaning performance while minimizing environmental impact. Ideal for cities, campuses, industrial areas, and more, electric sweepers are setting a new standard in street cleaning.

As air quality standards tighten and cities transition to green infrastructure, electric sweeping trucks like the CL5041TXSBEV play a critical role in supporting clean, healthy, and efficient urban environments.


ONLINE MESSAGE

Please fill in a valid email address
Captcha Can not be empty

RELATED PRODUCTS

This website uses cookies to ensure you get the best experience on our website.

Accept Reject